Keyword search: battery plant , lithium battery factory , power bank works , lifepo4 battery mill , lithium forklift battery manufacturer

MCCF method: Using pulse charging and discharging current with a duration of 5S, recording voltage drop, and calculating internal resistance.

HPPC method: According to PNGV regulations in the United States, there are two types of voltage drop caused by continuous charging and discharging pulses during testing (discharge time 18 seconds, charging for 2 seconds; both charging and discharging times are 10 seconds)

Comparison of two methods

We can see that the DC method is based on the physical formula R=U/I. Allow the battery to pass through a large constant DC current in a short period of time, measure the voltage at both ends of the battery, and calculate the current internal resistance of the battery according to the formula. This measurement method has high accuracy, and if properly controlled, the measurement accuracy error can be controlled within 0.1%. In summary, there are the following points:

1. Only large capacity batteries or batteries can be measured, while small capacity batteries cannot load a large current of 40A to 80A within 2-3 seconds.

2. When the battery passes through a large current, the electrodes inside the battery will undergo polarization phenomenon, resulting in polarization resistance. Therefore, the measurement time must be very short, otherwise the measured internal resistance value will have a significant error.

3. High current passing through the battery can cause certain damage to the electrodes inside the battery.

The AC testing method only tests the Ohmic internal resistance of the battery, and the important evaluation is the production process of the battery cell. We generally use the value of AC internal resistance to evaluate the qualification of the battery cell, and evaluate the coating effect of positive and negative electrode materials and the welding effect of electrode ears through the waveform of voltage to improve the process. In summary, there are the following points

1. The AC method can measure almost all batteries.

The measurement accuracy of the AC method is likely to be affected by the ripple current, which tests the anti-interference ability of the measuring instrument circuit.

Lithium ForkLift Batteries ,Ensure Quality

Our lithium battery production line has a complete and scientific quality management system

Ensure the product quality of lithium batteries

Years of experience in producing lithium forklift batteries

Focus on the production of lithium batteries

WE PROMISE TO MAKE EVERY LITHIUM BATTERY WELL

We have a comprehensive explanation of lithium batteries

QUALIFICATION CERTIFICATE

THE QUALITY OF COMPLIANCE PROVIDES GUARANTEE FOR CUSTOMERS

MULTIPLE QUALIFICATION CERTIFICATES TO ENSURE STABLE PRODUCT QUALITY

Providing customers with professional and assured products is the guarantee of our continuous progress.

Applicable brands of our products