Keyword search: battery plant , lithium battery factory , power bank works , lifepo4 battery mill , lithium forklift battery manufacturer

Maintenance and upkeep precautions for modular UPS power supply. Modular UPS power supplies have been increasingly used by users as lifeguards for sudden data center power outages. But as a more complex device, how to use and maintain it correctly? This is a question that everyone needs to understand. In the process of using UPS uninterruptible power supply, it is also necessary to master the correct maintenance methods, so as to ensure the quality of power supply and ensure the normal operation of the company's equipment.

Maintenance and upkeep precautions for modular UPS power supply

1. The UPS battery of the standard model is valve regulated, low maintenance type, and only needs to be regularly charged to achieve the expected lifespan. When the modular UPS is connected to the mains, it always charges the battery regardless of whether it is turned on or off, and provides overcharge and discharge protection functions;

If modular UPS power supply is not used for a long time, it is recommended to charge it every four to six months;

Under normal circumstances, the battery has a service life of three to five years. If the condition is found to be poor, it must be replaced early. When replacing batteries, it must be carried out by professional personnel;

4. The battery should not be replaced individually, and when replacing it as a whole, the instructions of the battery supplier should be followed;

Under normal circumstances, the battery should be charged and discharged every four to six months. After discharging and shutting down, it should be charged, and the standard charging time should not be less than 12 hours;

6. In high temperature areas, batteries should be charged and discharged every two months, and standard machine charging should not be less than 12 hours each time.

7. The internal dust accumulation of modular UPS should be cleaned regularly, and the cycle depends on the environment of the computer room. For computer rooms with poor environment, it is recommended to clean the UPS once every six months.

8. It is strictly prohibited to connect electrical equipment unrelated to computers, especially high-power electric tools, to UPS sockets; Otherwise, it may cause modular UPS to bypass, and in severe cases, it may cause instantaneous power loss of the UPS. Try to prevent a short circuit at the UPS output terminal, otherwise it may cause power outage and load failure in the case of minor incidents.

Installation precautions for modular UPS power supply

The area where modular UPS power supplies are placed must have good ventilation, away from water, flammable gases, and corrosive agents.

It is not suitable for measurement and placement. The air inlet holes at the bottom of the front panel, the fan outlet holes on the rear cover plate, and the air inlet holes on the side of the box should be kept unobstructed.

The ambient temperature around modular UPS should be maintained between 0 ℃ and 40 ℃.

If the machine is disassembled and used at low temperatures, there may be condensation of water droplets. It is necessary to wait for the inside and outside of the machine to completely dry before installation and use, otherwise there is a risk of electric shock.

Please place the modular UPS power supply near the mains input socket so that in case of emergency, the mains input plug can be unplugged and the power can be cut off.

Requirements for the usage environment of modular UPS

The placement position must be stable;

Each side of the modular UPS chassis must maintain sufficient ventilation distance from the wall;

● Keep away from heat sources, no direct sunlight, and no corrosiveness;

Maintain normal temperature and humidity; Keep the room clean.

Modular UPS power supply plays a crucial role in computer rooms and data centers. Proper use and maintenance of modular UPS batteries is one of the key factors in extending the lifespan of battery packs and reducing the overall failure rate of UPS power supplies. Master the knowledge of modular UPS power supply maintenance and upkeep, be able to identify problems and solve them in a timely manner.

Modular UPS power supply is installed in embedded standard cabinets and towers, with the characteristics of flexibility, easy installation, space saving, and easy maintenance. The design elements of rack mounted modular units greatly meet the needs of today's small and medium-sized data centers.

Lithium ForkLift Batteries ,Ensure Quality

Our lithium battery production line has a complete and scientific quality management system

Ensure the product quality of lithium batteries

Years of experience in producing lithium forklift batteries

Focus on the production of lithium batteries

WE PROMISE TO MAKE EVERY LITHIUM BATTERY WELL

We have a comprehensive explanation of lithium batteries

QUALIFICATION CERTIFICATE

THE QUALITY OF COMPLIANCE PROVIDES GUARANTEE FOR CUSTOMERS

MULTIPLE QUALIFICATION CERTIFICATES TO ENSURE STABLE PRODUCT QUALITY

Providing customers with professional and assured products is the guarantee of our continuous progress.

Applicable brands of our products