Keyword search: battery plant , lithium battery factory , power bank works , lifepo4 battery mill , lithium forklift battery manufacturer

The electric vehicle needs to run out of battery before the first charging, but it cannot run out of battery. When a new electric vehicle is purchased, the battery level will not be too full, but it will also not be too low, unless it is an old or inferior battery. When using it, everyone should estimate the approximate distance it can run based on the merchant's estimation, in order to avoid running out of electricity or running out of electricity. When the battery level of the electric scooter shows that it has reached the last grid, it is important to consider not riding and prepare to charge.

How to charge a newly purchased electric vehicle for the first time and precautions

The first charging should be done during the day. Everyone knows that the battery should be fully charged for the first time, but being fully charged does not mean overcharging. Charging during the day can easily control the charging time and prevent the battery from experiencing overcharging and discharging for the first time. This makes it easier to normalize the initial chemical reaction inside the battery.

Regarding the charging time for the first time, as the battery of the electric vehicle has not undergone charging and discharging before leaving the factory, it is necessary to ensure the normal operation of the battery. In general, the charging time should be around 5-6 hours, allowing the battery to be fully charged and allowing for a slightly longer charging time for future use. As mentioned earlier, charging during the day can be mastered.

After the first charging, although it may not be considered as the first charging, the second time is still considered as a new car charging. At this time, you can make the battery car almost run out of battery and then perform a long-term charging, which can last for 8-9 or even 10 hours, in order to allow the battery car to undergo a complete cycle of chemical reactions. This is what the electric vehicle merchant told me.

When charging an electric vehicle for the first time, the charger may generate heat quickly and high. Therefore, especially during summer charging, the charger should not be placed on objects that are prone to heat and combustion. It is best not to place it on the seat of the electric vehicle to prevent fire, as many people may experience spontaneous combustion of the electric vehicle while charging. Please be careful.

1. Use the original charger

Nowadays, the interfaces of mobile phone chargers are mostly universal, which leads to us being very casual when charging. We can use any charger we like. Although the charger interfaces are the same, their parameters are still very different, especially for low-quality chargers, which can seriously damage the phone battery.

2. Use original factory data cables

Some people think that data cables are just wires and don't need to be concerned. In fact, the resistance and material of the original long data cables have been strictly tested and will not have any adverse effects. However, low-quality data cables can harm the phone battery.

3. Do not charge with phone case

Although the phone case looks good and protects the phone, it should be removed when charging. The phone may generate heat during charging, and charging with a phone case can affect heat dissipation, which is also not good for the battery.

4. Do not charge your phone with a computer

Some people like to use the USB port on their computer to charge their phones, but the current on the computer's USB port is unstable and far from the charger, which can also harm the battery.

5. Do not play with your phone while charging

Playing with your phone while charging is a very bad habit. Doing so not only causes the battery to heat up and harm the phone battery, but also poses a greater risk of danger. It is better not to do so.

A new mobile phone battery, just be careful not to use a miscellaneous charger for the first time, and keep charging at regular room temperature.

The first three times of charging and discharging a new phone battery also require some attention.

1. For the first three uses, it is recommended to fully charge and discharge the battery to activate it.

After receiving a new phone, it is best to place the battery inside the phone and use the original charger provided with the phone to fully charge the battery (regardless of whether the original new battery still has any remaining charge). After the display on the phone screen shows that the battery is fully charged, which means that the battery level is 100%, charge for an additional 0.5-1 hour. Then use the phone normally until the battery runs out and it naturally shuts down. This can be considered a loop. When using a new phone, it is recommended to perform three cycles like this.

2. When using a mobile phone, it is best to fully discharge the battery.

Nowadays, mobile phones will have a remaining battery reminder; At the same time, when the remaining battery level is below 15%, the phone will display a prompt saying "charger needs to be connected". If it is convenient to charge but not in a hurry, you can continue to use the phone battery until the remaining battery level shows 6% to 8% before charging. This will facilitate a more thorough discharge reaction of the chemicals inside the battery.

After fully charging, if not in a hurry, it is recommended to continue connecting the phone to the charger and charge for an additional 0.5-1 hour. Although the battery level of the phone indicates that the battery has reached 100%, the phone is still connected to a charger, which will continue to charge the phone with a small current. This is commonly known as "trickle charging". This will also facilitate a more thorough charging reaction of the chemicals inside the battery.

Of course, some people may worry that if their phone forgets to unplug the charger, it may cause the phone battery to overcharge for a long time?

The answer is: Don't worry at all. Nowadays, mobile phones are equipped with current and voltage monitoring circuits inside, which can completely eliminate the occurrence of overcharging; In addition, there are circuits on the mobile phone battery or the circuit connecting the battery inside the phone to prevent overcharging and discharging of the battery.

When the phone is fully charged and the phone charger is constantly turned on, when the battery level drops to a certain level, the charging circuit of the phone will be opened again to charge the phone, which is equivalent to a charging and discharging cycle of the phone battery.

Lithium ForkLift Batteries ,Ensure Quality

Our lithium battery production line has a complete and scientific quality management system

Ensure the product quality of lithium batteries

Years of experience in producing lithium forklift batteries

Focus on the production of lithium batteries

WE PROMISE TO MAKE EVERY LITHIUM BATTERY WELL

We have a comprehensive explanation of lithium batteries

QUALIFICATION CERTIFICATE

THE QUALITY OF COMPLIANCE PROVIDES GUARANTEE FOR CUSTOMERS

MULTIPLE QUALIFICATION CERTIFICATES TO ENSURE STABLE PRODUCT QUALITY

Providing customers with professional and assured products is the guarantee of our continuous progress.

Applicable brands of our products