Keyword search: battery plant , lithium battery factory , power bank works , lifepo4 battery mill , lithium forklift battery manufacturer

A lithium battery is a battery panel composed of several cells, a set of safety protection circuits, and various safety devices. These safety designs can ensure automatic disconnection of the battery circuit in the event of overcharging, over discharging, and short circuits. But why is there always news of charging explosions? That's because inferior batteries or chargers were used.

2、 The correct use of batteries requires understanding several concepts

Complete discharge: The process in which the phone consumes battery normally until it automatically shuts down.

Fully charged: Insert the fully discharged phone into the charger to charge it until the phone prompts a full charge process.

Excessive discharge: After complete discharge, there will still be a small amount of electricity left inside the lithium battery, but this amount of electricity is crucial for the activity and lifespan of the lithium battery. If you forcefully turn on your phone again or use other methods to consume residual battery power, it is called excessive discharge, which can cause irreversible damage to the lithium battery.

Overcharging: In order to prevent accidents caused by overcharging, mobile phone batteries are designed with overcharging protection circuits, which automatically terminate the charging process after charging is completed. However, prolonged exposure to high voltage can have a negative impact on the battery and cause crystal precipitation and adhesion, which can shorten the battery life.

3、 The correct methods for using and maintaining batteries

1. Develop good usage habits, do not wait until the battery runs out before charging, and do not overcharge continuously for a long time. Lithium batteries prefer to be placed and charged shallowly. It is recommended that the phone's battery level should not be lower than 20% when charging, as this can protect the battery and extend its lifespan.

2. The entire process of charging a mobile phone battery includes three stages: fast charging, continuous charging, and trickle charging. After the first two stages, although the system displayed 100% battery level, the battery did not actually reach saturation. At this stage, the remaining capacity can only be supplemented by a small pulse current, which usually takes 30-40 minutes.

Only when all three stages are completed can the battery truly reach a good state of battery saturation. Third party battery management software can be used to monitor the charging status of the battery.

3. Try to use your phone as little as possible when charging. Because even multiple interruptions during lithium battery charging have little impact on the battery itself, it is better to disconnect the power when making phone calls or playing games.

4. Use original or reputable chargers and data cables, and never use inferior chargers and data cables to prevent explosions.

What lithium batteries are most afraid of

1. High temperatures above 100 ℃ can seriously affect battery life and storage capacity, and may cause battery melting or explosion. So, it is important to keep lithium batteries away from sources of fire and other heat sources.

2. From 35 ℃ to 100 ℃, the battery life is significantly affected by the temperature starting from 35 ℃ (human body temperature generally ranges from 36.2 ℃ to 37.2 ℃), and the higher the temperature, the greater the impact. So mobile phones should not be kept in close pockets frequently, especially in summer.

Lithium ForkLift Batteries ,Ensure Quality

Our lithium battery production line has a complete and scientific quality management system

Ensure the product quality of lithium batteries

Years of experience in producing lithium forklift batteries

Focus on the production of lithium batteries

WE PROMISE TO MAKE EVERY LITHIUM BATTERY WELL

We have a comprehensive explanation of lithium batteries

QUALIFICATION CERTIFICATE

THE QUALITY OF COMPLIANCE PROVIDES GUARANTEE FOR CUSTOMERS

MULTIPLE QUALIFICATION CERTIFICATES TO ENSURE STABLE PRODUCT QUALITY

Providing customers with professional and assured products is the guarantee of our continuous progress.

Applicable brands of our products