Keyword search: battery plant , lithium battery factory , power bank works , lifepo4 battery mill , lithium forklift battery manufacturer

What should the UPS manufacturer pay attention to when interpreting the production and use of UPS? The manufacturing process of UPS is also strictly controlled. UPS is widely used in various fields, especially in the fields of head office, financial securities, industrial control, etc. Today, the UPS power supply manufacturer will introduce it in detail.

What should UPS manufacturers pay attention to when interpreting UPS production?

UPS has many working processes and takes a long time, so it often needs to use multiple oscilloscopes and high-voltage differential probes to test at the same time, and it is also more troublesome to record data.

Nowadays, most integrated circuits use MOS circuits, and most UPS power modules also use MOS tubes and integrated circuit chips. In the production of power module, if the electrostatic protection is not careful, it will often lead to a high rate of defective components. Even if the test is qualified, it may cause slight damage to MOS tubes and integrated circuit chips due to static electricity during the manufacturing process, thus affecting the life and reliability of power supply modules.

The introduction of electrostatic protection system in the UPS production environment (such as human anti-static grounding, floor anti-static grounding and operation assembly, and instrument anti-static grounding) can effectively prevent the damage to MOS tubes and integrated circuit chips. Anti-static damage of electronic components is a complex system engineering, which runs through the whole process of system or equipment development and production.

The factors that affect the reliability of UPS products include design, process, management, testing and means, incoming materials and other factors, which are all the concerns of the manufacturers of UPS power supply module production and use. In fact, the reliability of UPS power supply should not only ensure the optimization of various performance indicators, but also ensure that the production environment of the power supply module is clean and orderly, with excellent electrostatic protection measures, and appropriate temperature and humidity. Only when the conditions are met, can the power supply module produced be truly a reliable power supply product.

The demand for UPS power supply in manufacturing, transportation and energy industries has shown a rapid rise, especially in the manufacturing industry, the large-scale rise of small and medium-sized companies has become a new source of power to drive the rise of the UPS power supply market.

What should the UPS manufacturer pay attention to when interpreting the use of UPS?

① When using uninterruptible UPS power supply, the relevant provisions of the manufacturer's product manual shall be strictly followed to ensure that the sequence of the live line and the zero line of the mains power connected by Shuotian UPS meets the requirements.

② Ensure the ambient temperature of the power supply. The usable capacity of UPS power battery is closely related to the ambient temperature. Generally, the performance parameters of the battery are calibrated under the condition that the room temperature is 20 ℃. When the temperature is lower than 20 ℃, the usable capacity of the battery will be reduced, while when the temperature is higher than 20 ℃, the usable capacity will be slightly increased.

③ The use principle of UPS power supply is to apply to the key equipment, rather than connect the equipment that is not necessary for power protection to the UPS, which can only increase the operating burden of UPS and shorten its service life. The load rate of UPS power supply should be controlled to ensure that the load does not exceed 85% of the rated power.

④ The capacity of the selected UPS should match the power of the protected object. If the capacity of the selected UPS is significantly higher than the power of the load equipment, the capacity of the UPS should reach the power of the equipment to be protected.

⑤ UPS uninterruptible power supply commissioning is to ensure the smooth operation of UPS. Before UPS uninterruptible power supply maintenance, in order to better ensure the smooth inspection and safe operation, UPS uninterruptible power supply shall be commissioned.

The maintenance of the UPS system and the key items that should be paid attention to during operation can effectively improve the use effect of the UPS system in work and make it more reliable and stable.

Lithium ForkLift Batteries ,Ensure Quality

Our lithium battery production line has a complete and scientific quality management system

Ensure the product quality of lithium batteries

Years of experience in producing lithium forklift batteries

Focus on the production of lithium batteries

WE PROMISE TO MAKE EVERY LITHIUM BATTERY WELL

We have a comprehensive explanation of lithium batteries

QUALIFICATION CERTIFICATE

THE QUALITY OF COMPLIANCE PROVIDES GUARANTEE FOR CUSTOMERS

MULTIPLE QUALIFICATION CERTIFICATES TO ENSURE STABLE PRODUCT QUALITY

Providing customers with professional and assured products is the guarantee of our continuous progress.

Applicable brands of our products