Keyword search: battery plant , lithium battery factory , power bank works , lifepo4 battery mill , lithium forklift battery manufacturer

The difference is the fixation and penetration mode of electrolyte in the battery. AGM is a superfine glass fiber separator, which is used to absorb electrolyte and supply oxygen composite channels. Colloidal sio2 is used to fix the electrolyte in the colloidal battery.

The AGM battery uses pure sulfuric acid aqueous solution as the electrolyte, and its density is 1.291.3lg/cm3. Most of them exist in the glass fiber membrane, and at the same time, there is a part of electrolyte inside the electrode plate. In order to supply the oxygen released from the positive electrode to the channel of the negative electrode, it is necessary to keep 10% of the pores of the diaphragm not occupied by the electrolyte, that is, the lean solution design. The pole group is tightly assembled so that the plate can fully contact the electrolyte. At the same time, in order to ensure sufficient battery life, the plate should be designed to be thicker, and the positive grid alloy should be Pb&rsquo- Q2w-Srr -- A1 quaternary alloy. The AGM type sealed battery has a small amount of electrolyte, a thicker plate and a lower utilization rate of active substances than the open type battery, so the discharge capacity of the battery is about 10% lower than that of the open type battery. Compared with today's colloidal sealed battery, its discharge capacity is smaller.

Compared with the same specification battery, the price is higher, but it has the following advantages:

The cycle charging capacity is three times higher than that of lead-calcium battery, with longer service life.

It has higher capacitance stability throughout its service life.

The low temperature performance is more reliable, and it is suitable for use in the northeast cold area.

Reduce accident risk and environmental pollution risk (due to 100% sealing of acid solution)

It is easy to maintain and reduce deep discharge.

Colloidal lead-acid battery adopts gel electrolyte, and there is no free liquid inside. Under the same volume, the electrolyte has large capacity, large heat capacity, and strong heat dissipation ability, which can prevent general batteries from being prone to thermal runaway; The electrolyte concentration is low, and the corrosion of the electrode plate is weak; The concentration is uniform and there is no electrolyte delamination.

It has the following characteristics:

1. High quality colloid is prepared by fumed silica, the electrolyte is evenly distributed, and there is no acid stratification.

2. The electrolyte is in a fixed state of gel, which is not flowing and has no leakage, so that all parts of the plate react evenly.

3. With tight assembly technology, it has excellent high rate discharge performance.

4. Excessive electrolyte, large thermal capacity of battery, strong heat dissipation capacity, and wide operating temperature range.

5. All high purity raw materials are used, and the self-discharge electrode of the battery is small.

6. Using gas recombination technology, the battery has high sealing reaction efficiency, no acid mist precipitation, safe and environmental protection, and no pollution.

7. Special design and highly reliable sealing technology are adopted to ensure that the battery is sealed, safe and reliable.

Lithium ForkLift Batteries ,Ensure Quality

Our lithium battery production line has a complete and scientific quality management system

Ensure the product quality of lithium batteries

Years of experience in producing lithium forklift batteries

Focus on the production of lithium batteries

WE PROMISE TO MAKE EVERY LITHIUM BATTERY WELL

We have a comprehensive explanation of lithium batteries

QUALIFICATION CERTIFICATE

THE QUALITY OF COMPLIANCE PROVIDES GUARANTEE FOR CUSTOMERS

MULTIPLE QUALIFICATION CERTIFICATES TO ENSURE STABLE PRODUCT QUALITY

Providing customers with professional and assured products is the guarantee of our continuous progress.

Applicable brands of our products